Showing posts with label kosutte. Show all posts
Showing posts with label kosutte. Show all posts

Monday, November 1, 2010

Mishaps, Contemplation and More Kossute Magic

 
As the BACWC draws near and most everyone are doing the finishing touches on their entries, I've also slowed down a bit from painting especially with the weather changing like a woman who can't make her mind which donut to pick.  In my experience, I've been able to "sense" the weather changes and adjust how I paint parts.  The good thing about painting with cans is one can work quickly even with layered colors because of their fast drying properties and most primer-based paints like the Flat Black I adore so much doesn't really care what kind of weather there was (or for that matter, what mood I was in).  With flat black, my layering works still, but with longer drying times since I was going for a smooth finish instead of textured this time off. 

I've had a few mishaps, but, nothing I can't handle.  I've finished the Chimera in less than week, considering that painting that monstrosity was a PAIN to begin with with all the parts interlocking with each other.

Anyways, most people think my entry consists only of the Chimera Diorama, but, to some, it should come as no surprise that the Angelus hopefully will also ascend this weekend.  My previous blog entry, the Sinanju cables, was the clue that I'm cooking up more than just one mythical beast.

It seems that my itch turned rash turned zombie infection of a build called the Chimera superseded the Glory of the Angelus, but I was actually deciding if I'll simplify the Angelus wings further.  While deciding (after completing the Chimera's paint job), I did start painting the Angelus, almost with disastrous results.  The shield basically disintegrated before my eyes as paint trial upon paint trial just wouldn't work.  The red bled through the paint mo matter what I did. I even layered both flat black, and primer gray to shield the white paint (Bosny 40 White and Flat White) to no avail, so, Instead of ruining my momentum and wasting any more paint, I realized I should use that to my advantage.  I shan't be showing the booboo turned "innovation" just yet, though.

Also, I've got a few "negative" reactions from some people about the Chimera's chosen scheme (Owing that I was using the same Nickel Alloy) paint, but, hopefully, they'll change their minds later on.  Sufficed to say, the Angelus and the Chimera, both being mythical creatures, have similar schemes with different accents.

Anyways, here are a couple of snapshots of the Angelus' main back pack frame, painted with the usual flat black then enhanced with Kosutte.  To achieve the effect on the thruster bells, I masked the outer then painted the inner of the bell with my layered red combo.  I left the outer plastic bare and progressively sanded the surface (400-500-2000) for the Kosutte to give it that "almost-metal" shine everyone likes.



I mentioned before that all will be revealed on the 5th of November (as a post-dated entry), but I misread the details of the submission regarding the dates.  Deadline for emailing is on the 3rd, actual submissions on the 5th and 6th, NOT the 4th and 5th as I originally thought.  I originally set it on the 5th because I though that was the second day of submission, and Kisapmata offered me a ride on that date.  Worse case scenario is I will have to submit on the 6th to maximize my build time, because I still don't have a diorama to speak of.

Saturday, April 24, 2010

The Dragon Ronin Astray Part XI

And the Deadline Passed Me By...

The Gerbera Straight and Tiger Pierce blades. I won't be stripping off the chrome, but, I'll just remove the nub marks.

Posted Image

Stripping the gold off the sword parts is soooo slow since I couldn't find Chlorox. Winrox is like Zonrox.

The last picture is after 24 hours of soaking.

Posted Image

Decided not to use the stock backpack since it'll take me more time modifying, so I customized something similar. I used the surplus Strike groin armor as the mold for the build.

Posted Image

Progress of the backpack.

Posted Image

The objects in the last pic are ear cleaners.... 

 The paints...

Posted Image

More back(pack) pains..

Posted Image

Posted Image

The mysterious thingee that has been giving me deja vus...

Posted Image

Initial paint stages...

Posted Image

A technique I used before with the Big Red/HiNu.

Instead of clear/clear gloss, I used flat/matte clear as a top coat, essentially defeating the purpose of the shiny metallic effect, but yielding, at least for me, better results...

Posted Image 

 Subtle color difference between the Tiger Pierce (left) and the Gerbera Straight. I achieved this by varying the coats of Metal Alloy over flat black, then Honda Red. I used Metal Alloy instead of my usual Gold 351 since it gives a more striking and visually better effect.

Posted Image

 The sword guards, pummels and sheath ends finally stripped of its gold coat. There's still a wee bit left, but I'll sand those off.

Posted Image

Gotta love flat black. It's a primer and base coat in one, and gives a nice, deep tone to metallic paints.

Posted Image

Muted metallics.  They look good enough to eat... 

The stock thruster, and the custom.

Posted Image

Another kosutte trial. I will be using a couple of Sinanju H4 thrusters inside the custom ones.

Posted Image

The scabbard/sheath painted with Metal Alloy and the sword guard painted with Metal Alloy + Gold 351.

Posted Image 

The scabbard/sheaths of the Tiger Pierce and Gerbera Straight.

Posted Image

Posted Image

The layered armor of the groin guard...

Posted Image 

Presanding, when done right, and the parts are aligned well, basically removes the seamline even without cement. This is perfect for ootb snapbuilding.

Posted Image

The Gerbera Straight (top) and the Tiger Pierce.

Posted Image

Black and Red...

Posted Image 

Posted Image

The yet to be finished Zen Shrine dio.

Posted Image

Unfortunately, I won't be able to make it to the deadline, and even though I still had a few hours left, I'd rather not ruin a good build by rushing it. 

With the head mods, the Ronin's neck looked visually short, so I decided to mod the neck joint and added 3mm, just enough to give it clearance.

I cut away the base of the ball joint from the main connector used 2mm beams and 1mm plates to rebuild the shaft. I then added pegs to the base, drilled holes to the main to make a strong connection.

Posted Image

Posted Image

Fits like a glove.

Posted Image

Before and After modifications...

Posted Image

I will have to "thicken" the neck later on. 


Assembly update.

Posted Image

Posted Image

Posted Image

There's a-plenty I need to rework.  Project's on-hold indefinitely...

Monday, April 5, 2010

The Dragon Ronin Astray WIP


I was planning to enter my Impaler X DevilWings (Sinanju) for the BAKUC, but having noticed (as DonC has) the numerous Sinanjus being built ultimately for the BAKUC, I had a hard time deciding which kit to enter.

Recently, I snapped-built my G05 and my Turn A before that (as a break from the Queen build), and felt I could probably do some major improvements and enhancements, but then realized I like them now as they are and didn't really get any new ideas.

Simply said, I was stuck. With the Queen's pending completion (though I consider this my most ambitious build with all the modifications, I'd rather enter the Queen in another contest), I started working on the 1/60 Clear Astray Bust, and that got me to dig out my built PG RF Astray (I was one of the first few here in Manila to own one, and built it almost as soon as I got it, but boxed it as soon as I was able to take some shots).

Anyways, it dawned on me; maybe I should work on this feller...

Posted Image

The Newbie Stash

Source This is a collection of specific guides for reference in Gunpla Building and Modeling in General.  • Gunpla™ and Modeling Terminolog...