The Scarlet JinX: First Look

More photos later...

The Scarlet JinX WIP Part VII

A quickie update:


Here's another example of why I love using Flat Black.  Flat black dries semi-smooth and can serve both as primer and base coat (which makes it perfect for frame jobs, pun intended).  This is the rear skirt frame of the Jinx, painted with Flat Black, then later "carbonized" with Kosutte using cotton buds as applicators. 

The Arm Frames, assembled, painted and carbonized.

A smorgasbord of armor parts, painted with Nickel-Alloy.  Some will be painted with Honda Red later on.

The assembled lower body frame.  I painted and carbonized most of the frame except the pegs and connectors for easier assembly.

The Modified GN Tau Drive.  Although there was an option to purchase red LED modules, I opted to make my own (it's fairly easy in my case).  I've made casings using plaplates that fit into the stock drive like a charm, making it possible for me to assemble disassemble the drive easily during wiring and testing.  I used A combination of Wave and Koto Springs for a neat solderless wiring.

Unlike the MG Exia's Drive cone which has a chrome-plated core, the GN Tau Drive's core is an unplated core, and its construction blocks of most of the light when assembled, dimming the light in the process.  I got an OC attack during final assembly and figured out a way to make the light shine brighter without modifying too much of the drive.  The solution was simple:  I used a piece of Tamiya Holographic sticker as a reflector on the Drive core and cone assembly.  This increased the brightness by about a hundred per cent.

That's it for now.

The Scarlet JinX Lance Part III

Quickie update.  The Lance test fit.

The Scarlet JinX Lance Part II

I used 3mm beams to create a combined sword guard and rifle handle for the lance.  I also added a peg and socket connection for a sturdy fit between the lance and the hilt guard.  Again, I could have simply joined the two sections together and be done with it, but it's actually part of my thought process.  Also, having this system makes it easier to paint the parts if I decide to paint them in different colors (which I realized later that I would).

More Plaplate bending.  1.0mm plaplates can indeed be bent, but certain shapes are more difficult to form.  In these cases, I use two thinner (0.5mm) plates, one cut slightly larger into shape than the other and bent separately into shape.  These two are then cemented together and continually formed into shape.

At certain times, I also use masking tape to hold the shape ( so I can do other stuff, say, like update this blog) until the cement hardens and cures.  The cement dries in as little as 10 - 30 minutes, the plates will hold the form but is still flexible enough for additional manipulation.  A cemented build totally cures and is almost impossible to bend without breaking in a day or so.

To be continued...

One Thousand Views in 4 Hours...

...but NO comments (so far).

Check it out here!

The Scarlet JinX WIP Part V

Detailing.  I've employed a few borrowed techniques from DonC and a few others on plaplate detailing.  Man this is PAINFUL work (mainly because of my eyesight, and my lack of dexterity/patience when handling/cutting very small parts.  I don't know how DonC and the other guys who do this DO this).

I penciled the design on the armor itself (this one attaches to the back of the thigh), then overlayed a wide piece of regular office type masking tape and and traced the initial sketch.  I then attached the masking tape to a 0.3mm plaplate and made two copies by taping another piece underneath and cutting them at the same time using scissors and side cutters.  I used this technique to most of the detailing mods that needed at least two instances of the part.

The Scarlet JinX WIP Part IV

The JinX's Double Bolo.  

"Dreams and Fantasies seem to have more meaning when they come into life..."

The JinX's custom weapon actually came to me in a dream.  It's roughly based on the shape of a Jungle Bolo, a favorite tool of most local a farmer here in the Philippines, and equally lethal a weapon that makes Rambo's army knife look like a butter knife (Rambo eventually had one eventually, if I remember it correctly).  Even before I started working on the JinX, this weapon has been playing my imagination like a melody would when I'm writing songs.

With some of my modification or scratch build projects, I usually sketch first to get a feel more of how to go about building, and some do look good on paper, but fail miserably when the first few pieces of plaplates are cut. 

The initial sketches of the Double Bolo.

The Scarlet JinX WIP Part III

The "Simple" Waist mod.  Since I've lengthened the neck, I also decided to lengthen the waist.  I was thinking of a very complicated modification involving cutting the waist parts and lengthening them so so, but, looking at how it was constructed, the waist is comprised of a Z-type hinge (similar to double-swing doors in some restaurants).  This actually allows the waist raise a certain height, so I thought I'd exploit that instead.

The waist connection has a notch on each side that serve as pivots for the forward and backward tilt.  They rest inside the waist receptacle when mounted, but can be moved out of it so they rest just on top of the receptacle.

The Scarlet JinX WIP Part II

Heat-less plaplate bending.  I used a pair of toothless longnose pliers to gently bend 1.0mm plaplates into shape.  I don't use heat since the plates will harden as soon as they cool down, making it almost impossible to manipulate any further.

Project Codename: Scarlet JinX WIP part I

While rearranging my kits, storing some and displaying others, and contemplating over the pending completion of the Crimson Cherub (the K'Triya, which I can't seem to finish because of painting issues), I stared at one of my favorite kits (next to the Sinanju and Hi-Nu) to ever get without having a second thought about getting it.

The GN-X has been tagged by some modelers/collectors as the next "grunt" MS (to the chagrin of some hardcore UC fans), not necessarily replacing the iconic Zakus in appeal.  The GN-X, or "JinX" as I like to call it (incidentally, that's how it's pronounced or nicknamed it in the English version of 00, so I guess I'm right on the dot), is a very fresh design and came as a surprise when Bandai announced it to be the next MG after the much-debated Ignition Mode MG Exia.